Booting from Removable Media: Difference between revisions

From Info Wiki
Jump to navigationJump to search
No edit summary
(listed possible removable device types)
Line 13: Line 13:
#*increasing variety of removable media devices
#*increasing variety of removable media devices
#*migration to UEFI firmware, which has different procedures
#*migration to UEFI firmware, which has different procedures
#possible device types i might be recognised as
#*"CDROM" for ''internal'' optical drive
#*"USB CDROM" for ''external'' optical drive
#*"USB CDROM" for USB drive written from standard dotISO
#*"USB HDD" for USB drive written from hybrid dotISO
#*"SD" for ''internal'' SD drive
#*USB card readers and flash/pen drives might appear to firmware as either
#**USB FDD or
#**USB HDD
#**depending on how the software installed to them was complied
#**no harm in trying one or the other, until boot is achieved
#The selection of "drive" and hence OS is done at POST stage and depends on type of firmware in the computer
#The selection of "drive" and hence OS is done at POST stage and depends on type of firmware in the computer
#USB card readers and flash/pen drives might appear to firmware as either
#*USB FDD or
#*USB HDD
#depending on how the software installed to them was complied
#*no harm in trying one or the other, until boot is achieved
==== BIOS ====
==== BIOS ====
*usually by pressing F11 at POST stage - sometimes other keys such as F12, F8
*usually by pressing F11 at POST stage - sometimes other keys such as F12, F8

Revision as of 03:50, 24 August 2012

Scope

The following are now treated as removable media, in additon to the traditional Floppy & CD?DVD drives

  • USB "flash/pen drives"
  • USB card readers
  • inbuilt SD readers
  • external drives
    • HDD
    • CD/DVD/Blueray

Selecting Boot Device

  1. This task has become more complicated in recent years as a result of:
    • trend towards removable media devices being set to DISABLED by default, as a counter to malware
    • increasing variety of removable media devices
    • migration to UEFI firmware, which has different procedures
  2. possible device types i might be recognised as
    • "CDROM" for internal optical drive
    • "USB CDROM" for external optical drive
    • "USB CDROM" for USB drive written from standard dotISO
    • "USB HDD" for USB drive written from hybrid dotISO
    • "SD" for internal SD drive
    • USB card readers and flash/pen drives might appear to firmware as either
      • USB FDD or
      • USB HDD
      • depending on how the software installed to them was complied
      • no harm in trying one or the other, until boot is achieved
  3. The selection of "drive" and hence OS is done at POST stage and depends on type of firmware in the computer

BIOS

  • usually by pressing F11 at POST stage - sometimes other keys such as F12, F8
  1. then select relevant device type
  2. then select relevant "drive"
  3. followed by relevant OS, if more than one on the drive
  • computers earlier than about 2004 may have limited ability to boot external devices

UEFI

  • usually requires entering "Setup" mode for firmware
    • usually by pressing DEL at POST stage
  • doing so will require password, if one set in CMOS
  1. navigate to "Boot" tab
  2. select "Boot Override"
  3. select relevant "drive"
  4. followed by relevant OS, if more than one on the drive


--Rpeters13:25, 24 August 2012 (EST) --