Floppy Disk Conversion

From Info Wiki
Revision as of 05:51, 11 September 2013 by Rpeters (talk | contribs) (added guidelines for conversion between formats and transfer to contempory (USB) media)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

For General Users

Many modern PC have neither floppy disk drives nor facility to install them. Some computers in the Main office at PCUG can be used to transfer data between:

  • 3.5 inch floppy disks and USB devices (memory sticks/portable HDD)

Floppy disks can be converted at PCUG, via a different, older PC that is held in store and has the capability to read/write:

  • 5 1/4 inch floppies of MSDOS format in 1.2MB (HD), 360 kB (DS) and possibly 180 kB (SS) capacities
  • 3 1/2 inch floppies of 1.44 MB (HD) and 720 kB (DD) capacities

Members need to ask the Staffer's permission to set up the older PC for use.


Getting Technical

Windows PC generally can't read Macintosh floppies. Macintoshes were able to convert between the two formats - however PCUG does not hold a Macintosh computer.

2.88 MB (ED) floppy drives have a different cable interface and cannot readily be fitted to PC. Anyone needing to recover data from them would need to ask in another forum. Essentially, a 1990 vintage IBM PS/2 computer is required.

One rule of thumb is that lower density magnetic media has poorer durability than higher density. Anyone needing to recover data from 5.25 inch floppies is advised not to delay.


--Rpeters 15:51, 11 September 2013 (EST)