PCUG Training Room - Notes for Presenters

From Info Wiki
Revision as of 15:41, 16 April 2014 by Rpeters (talk | contribs)

Jump to: navigation, search

Please do not alter these notes unless you are a PCUG Trainer or Technical Volunteer. The notes are provided as a Quick Start Guide to Presenters, some of whom might be using the projector for the first time

General guidance for using projectors/multiple displays on computers are at



Primary connection is now via HDMI

  • the 3-way HDMI switch defaults to the only powered port
    • normally either Trainer PC or Presenter's device
    • up to 2 Presenter's devices can be attached simultaneously and switched via the button on top of the switch


The projector also supports VGA

  • the VGA switch used is not automatic
    1. connect a "flying" VGA cable to your computer
    2. ensure that the purple VGA switch is set to the same cable number
      • press button in middle of switch until relevant red LED iights
      • press INPUT button on prjector remote
    3. use up/down arrow keys on remote to select Computer (VGA) at top of menu
    4. press enter to activate and exit menu
      • allow about 15 seconds for projector to switch inputs and your computer to "wake"
      • at end of session, return input to HDMI

USB Drive

The projector supports direct display of Powerpoint presentations from a USB device

  1. plug USB drive to projector's socket on rear
    • correct any resulting misalignment of the projector image on screen
    • do not pull down on projector
    • push up' on relevant edge or not in horizonal plane