Printing via Network
Linux & Mac OSX
Sharing printers between these environments should generally work, because both use same CUPS printing sub-system. CUPS is a newer printing sub-system, for which the key advantages include:
- supports a wide range of printers dating back to before 1990
- regardless of Operating System version
- when printing via network, does not require any printer driver on the desktop/laptop PC
- simplifies printing configuration for networked PC
- facilitates printing from a laptop/netbook/tablet computer being used away from its home location
- might permit printing from a computer where the administrator password (which may be required to install drivers) is unknown.
CUPS admin is accessed via the URL https://localhost:631 - which does not require active Internet connection alternatively an applet "Print Settings" may be used - if not installed, obtain from package "system-config-printer"
- to share a printer via a Linux/OSX server or another Linux/OSX machine see Sharing Printers via CUPS
- to use a printer via a NAS, see the documentation for the NAS, which varies widely
- alternatively, to print to a printer directly attached to the wired or wireless network, set it up via Control Panel or CUPS admin
- consider setting up one PC & printer this way as a contingency for failure of the print server/NAS.
- to print via Samba to a printer attached to a Windows machine – use the Samba option via Ctl Panel or CUPS admin
- this option requires CUPS printer driver available for and installed on PC/laptop
Windows 8 and later should automatically discover any network printers. If not, then printing can be done directly to most printers that are attached to a wired or WiFi network , without the need for a print server, after the following manual configuration:
- install relevant printer driver on PC
- drivers from the manufacturer's CD or web-site often provide better functionality than inbuilt Windows drivers
- go to Control Panel -> Hardware & Sound -> Device & Printers -> Add a Printer
- click -> the Printer that I want is not Listed
- select Add a Printer using TCP/IP address or hostname
- on next screen
- enter IP address of the printer
- enter (arbitrary) port name
- on next screen select relevant printer driver
- after installation completes, right click on printer icon and select "Printing Preferences" -> "Advanced"
- set paper to A4 or A3, as appropriate