Raspberry Pi

From Info Wiki
Revision as of 23:23, 7 September 2012 by Rpeters (talk | contribs) (added info re fragile capacitor & power supplies)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

A growing body of information is available at http://www.raspberrypi.org

Only a couple of critical issues, that are easily overlooked, are summarised below

Circuit Board

Power is supplied via the micro-USB connector at one end. The surface-mounted capacitor behind that connector is a known physical weak-point.

  • do not grip the board by that capacitor
  • preferably leave the micro-USB power cable permanently plugged in and power ON?OFF by either
    • powering the plug-pack/USB-hub ON?OFF or
    • disconnecting the other end of the power cable

Power Supply

  1. A raspberry pi draws 0.7A (700 mA) of regulated 5V power, which is beyond the capacity of most:
    • USB sockets on a computer
    • mains-USB plug packs
  2. Suitable power supplies include
    • mains-USB plug packs rated at 1A
      • preferably having a single USB socket only
    • USB-hubs capable to delivering 1 A to a single USB socket
      • "Zipp" brand from Big W does - but check before purchasing
  3. although the use of a USB-hub as a power source is deprecated by the manufacturers, it has been used sucessfully by the developers at http://www.ipfire.org. Critical factors are:
    • regulated power to the hub
    • 1 A available to a single socket

Rpeters09:23, 8 September 2012 (EST)