SSD Linux: Difference between revisions

From Info Wiki
Jump to navigationJump to search
(outline of cloning, management software and TRIM command)
 
(added change from CFQ)
 
Line 2: Line 2:
== Cloning ==
== Cloning ==
The data migration tool provided by most SSD manufacturers runs only under Windows. If a machine does not have Windows, then a generic tool, such as Clonezilla would need to be used.
The data migration tool provided by most SSD manufacturers runs only under Windows. If a machine does not have Windows, then a generic tool, such as Clonezilla would need to be used.
== I/O Scheduler ==
Desktop oriented distributions typically have this set to CFQ - which is suited to conventional HDD. SSD have greater parallelism and should benefit from setting to "noop" or "deadline". The exact procedure for this low-level change in kernel settings varies with distribution.
== Management ==
== Management ==
Line 18: Line 21:
Manufacturer's data sheets often do not state whether or not TRIM is supported. It is known to work with the following brands under Linux
Manufacturer's data sheets often do not state whether or not TRIM is supported. It is known to work with the following brands under Linux
*ARC
*ARC

--[[Category:Technical Info]]

Latest revision as of 02:35, 12 July 2016

Cloning

The data migration tool provided by most SSD manufacturers runs only under Windows. If a machine does not have Windows, then a generic tool, such as Clonezilla would need to be used.

I/O Scheduler

Desktop oriented distributions typically have this set to CFQ - which is suited to conventional HDD. SSD have greater parallelism and should benefit from setting to "noop" or "deadline". The exact procedure for this low-level change in kernel settings varies with distribution.

Management

SSD require a manufacturer specific tool for some operations, notably secure erase. Only the following brands are known to provide a software tool which runs under Linux

  • ARC
  • Micron

TRIM

TRIM is a standard (S)ATA command. Most implementations of Linux do not invoke TRIM automatically in background. It needs to be run manually on a weekly or longer basis, depending on rate at which the SSD is written.

#trim -v /dev/sd(x)  

gives useful information

If only a small percentage of the drive is trimmed, then the TRIM interval might be extended ?

Manufacturer's data sheets often do not state whether or not TRIM is supported. It is known to work with the following brands under Linux

  • ARC

--