Difference between revisions of "Serial Console"
From Info Wiki
(added outline of parameters to connect serial cable) |
|||
Line 6: | Line 6: | ||
*requires serial console for initial installation |
*requires serial console for initial installation |
||
*Linux generally allocates these as /dev/ttyUSB0 |
*Linux generally allocates these as /dev/ttyUSB0 |
||
+ | |||
+ | === minicom === |
||
+ | *default parameters do not match Banana Pi. The following settings might need to be configured |
||
+ | **baud rate 115200 |
||
+ | **software flow control Yes |
||
+ | **LF Yes |
||
+ | **CR Yes |
||
+ | *might be necessary to press "Enter" to get minicom to change from "Offline" to "Online" mode |
||
+ | |||
+ | === Putty === |
||
+ | TBA - might require no reconfiguration |
||
== Cubieboard == |
== Cubieboard == |
Revision as of 12:35, 16 August 2015
Several sub-compact devices do not provide initial output to a video device. A serial console must be used for installation
- NB many use 3.3 V or 5 V serial interfaces and are likely to be damaged if connected to the conventional COM socket on a PC
- USB-serial cables are available cheaply and tend to use 3.3 V interface
Banana Pi
- requires serial console for initial installation
- Linux generally allocates these as /dev/ttyUSB0
minicom
- default parameters do not match Banana Pi. The following settings might need to be configured
- baud rate 115200
- software flow control Yes
- LF Yes
- CR Yes
- might be necessary to press "Enter" to get minicom to change from "Offline" to "Online" mode
Putty
TBA - might require no reconfiguration
Cubieboard
- requires serial console for initial installation
Raspberry Pi
- most software puts signal to a video port (Composite of HDMI) during initial installation
- use of a serial console for initial installation is optional