Serial Console

From Info Wiki
Revision as of 02:36, 16 August 2015 by Rpeters (talk | contribs)
Jump to navigationJump to search

Several sub-compact devices do not provide initial output to a video device. A serial console must be used for installation

  • NB many use 3.3 V or 5 V serial interfaces and are likely to be damaged if connected to the conventional COM socket on a PC
    • USB-serial cables are available cheaply and tend to use 3.3 V interface

Banana Pi

  • requires serial console for initial installation
  • Linux generally allocates these as /dev/ttyUSB0

minicom

  • default parameters do not match Banana Pi. The following settings might need to be configured
    • baud rate 115200
    • software flow control Yes
    • LF Yes
    • CR Yes
  • might be necessary to press "Enter" to get minicom to change from "Offline" to "Online" mode

Putty

TBA - might require no reconfiguration

Cubieboard

  • requires serial console for initial installation

Raspberry Pi

  • most software puts signal to a video port (Composite of HDMI) during initial installation
  • use of a serial console for initial installation is optional

--Rod (talk) 12:36, 16 August 2015 (AEST)